These boards can also be transported to the park, beach or your friends backyard.
Cut the 2x4s into the following lengths: four 48 pieces, four 21 pieces and four 12 pieces.
The Steps
1.
Sand the edges of all of your cut plywood and 2x4s.
Cut the center hole in the board.
Find your center and use a compass to draw your circle.
Drill a starting hole for your jigsaw then cut along the circle line.
Sand the inside and outside edges of the hole.
Use a speed square to get your corners at a perfect 90 degrees.
The corners need to be square so the platform fits exactly over the frame.
Measure the center point of the 2x4 then place your compass here and mark your half circle.
Use your jigsaw and cut the end and sand it.
Drill a hole through the center point of the 2x4 leg using a 3/8 bit.
Use a wingnut so you could easily loosen and fold down the legs for storage.
We recommend using semi-gloss or high-gloss paint so the bean bags will slide well across the platform surface.
If your bag goes through the hole the team is awarded 3 points.
The first team to 21 points wins.
Photos fromCharles & Hudson.
